Volkswagen Jetta ECM 07K906055P | 2009 Jetta | Rabbit 2.5L | VIN Programmed | Engine Control Module Bosch ME17.5

Ecu Plug and play | Plug and Drive | Immobilizer off.

Part Number: 07K906055P (07K 906 055 P)

Hardware: Bosch ME17.5 | Engine: 2.5L 5-cylinder gasoline

Compatible vehicles: 2009 Volkswagen Jetta 2.5L and 2009 Volkswagen Rabbit 2.5L. Always verify the part number printed on the label of your original module before ordering.

About the Volkswagen Jetta ECM 07K906055P

The Volkswagen Jetta ECM 07K906055P is the Bosch ME17.5 engine control module used on the 2009 Volkswagen Jetta and Rabbit equipped with the 2.5L five-cylinder engine. This ECM controls fuel injection, ignition timing, the electronic throttle, emissions systems and communication with the other modules through the CAN bus. When the unit fails, the vehicle may not start, may stall while driving, or may show several communication fault codes at the same time.

Every replacement unit is bench tested on our simulation equipment, programmed with your VIN and immobilizer information, and shipped ready to be installed back in the exact vehicle. No additional dealer programming is required: plug it in and drive.

Common Problems

• 01314 - Engine control unit defective / P1640 ECM (EEPROM) Component defective.
• P0601 / P0606 - Internal control module memory or processor fault.
• P2101 - Throttle actuator control motor circuit range/performance.
• P0480 Cooling fan one control circuit - NA.
• Engine cranks but does not start due to immobilizer mismatch.
• Other CAN bus participants report communication problems with the ECU.

How to Order

Include your 17-digit VIN with the order so our team can program your Volkswagen Jetta ECM 07K906055P to your 2009 Jetta or Rabbit. If you have questions about compatibility, contact us before purchasing and we will confirm the correct part for your vehicle.

Warranty

One year.

Why trust us

Our engineering team has over 15 years of experience, more than 10K repaired ECMs, and the latest simulation technology. We are always happy to provide technical assistance. Feel free to contact us to discuss the faults you are experiencing before sending in your parts.

ECM Engineering USA / ECM Repair USA

Share ON: Twitter | Facebook | Linked In | Tumblr